Buscar
Itens para a visualização no momento 1-10 of 16
Modelo de rede neural de múltiplas escalas de tempo aplicado ao robô Dimitri
(Universidade Federal de Santa Maria, 2017-02-22)
The idea for the implementation and application of the Multiple Timescale Recurrent Network (MTRNN) model started with experiments based on machine learning (Peniak et al., 2011; Nobuta et al., 2011). In which a humanoid ...
Projeto e desenvolvimento de um sistema para detecção da fração volumétrica de água contida no etanol
(Universidade Federal de Santa Maria, 2017-07-14)
In a constant search for new technologies to help and minimize the economic and environmental impacts, the research on new fuels and their methods of use for the generation of energy, through the burning of these, have ...
Projeto de um retificador controlado aplicado a uma fonte ininterrupta de energia de dupla conversão monofásica sem transformador
(Universidade Federal de Santa Maria, 2017-12-11)
This work proposes a half-bridge rectifier, digitally Controlled, as the input stage of a
single conversion, single-phase, transformerless UPS. The purpose is to maintain the rectifier
and the DC discharge service, also ...
Kit didático para o ensino de eletrônica de potência e controle digital de sistemas
(Universidade Federal de Santa Maria, 2017-07-14)
This report does a brief introduction on engineering education methods, which concludes that experimental classes are more effective ways of eaching, because it allows the application of the knowledge obtained in classes ...
Conversor boost para rastreamento do ponto de máxima potência de um gerador síncrono de imãs permanentes empregado em geração eólica
(Universidade Federal de Santa Maria, 2017-08-15)
This work explores the actual need of renewable energy generation through the development of a boost converter to extract the maximum power of a permanent stator magnet wind generator (PSMG) isolated from the grid. Such ...
Projeto e implementação de um conversor cc-cc elevador de tensão para uma bancada didática de eletrônica de potência e controle digital de sistemas.
(Universidade Federal de Santa Maria, 2017-08-11)
The main purpose of this report is the development of a DC-DC step-up, also known as a boost converter, which will compose a didactic workbench that will aid in the teaching of Power Electronics. Through a market research ...
Projeto e implementação de um conversor CC-CC elevador-rebaixador de tensão para uma bancada didática de eletrônica de potência e controle digital de sistemas
(Universidade Federal de Santa Maria, 2017-08-10)
The present report describes the design and construction of a low-cost and low-size DC-DC step-up-down converter (also known as buck-boost converter) for a didactic bench that can be used in the experimental classes of the ...
Projeto e implementação de um retificador controlado a tiristor para bancada didática de eletrônica de potência
(Universidade Federal de Santa Maria, 2017-12-20)
This work consists in designing and implementing a thyristor controlled rectifier for teaching Power Electronics. A study has been conducted of commercial solutions present in the market, which have deficiencies in relation ...
Conversor Boost para rastreamento do ponto de máxima potência de um gerador síncrono de imãs permanentes empregado em geração eólica
(Universidade Federal de Santa Maria, 2017-07-14)
This work explores the actual need of renewable energy generation through the development of a boost converter to extract the maximum power of a permanent stator magnet wind generator (PSMG) isolated from the grid. Such ...
Projeto e implementação de um inversor de topologia meia ponte utilizando controle digital
(Universidade Federal de Santa Maria, 2017-12-12)
The present report describes the design and construction of a half bridge topology inverter, using digital control technique. The inverter design is described in steps, where the output filter is first designed, then the ...