dc.creator | Cruz, Bruna Silva da | |
dc.date.accessioned | 2023-08-28T19:35:08Z | |
dc.date.available | 2023-08-28T19:35:08Z | |
dc.date.issued | 2023-07-21 | |
dc.identifier.uri | http://repositorio.ufsm.br/handle/1/30100 | |
dc.description.abstract | The generation of waste from different sectors of the Brazilian economy has
generated studies and research related to the consumption and disposal of the most
varied products. In this context, the industries of the footwear sector, traditional in the
State of Rio Grande do Sul, are inserted, which have the need to seek sustainable
actions in the reuse of leftover raw materials from the production of footwear.
Therefore, this work aimed to evaluate the use of a lightweight aggregate based on
polyester waste and PVC laminate extruded with recycled polystyrene in
cementitious matrices. Reference mortars were prepared with a mass ratio of 1:3
(cement: dry sand) and a water/cement ratio (w/c) of 0.48. Another four mortars were
prepared with levels of replacement of quartz sand, in volume, by light aggregate, at
25%, 50%, 75% and 100%. The results in the fresh state of the mortar show that the
workability reduced with the increase in the percentage of light aggregate in the
mortar. In the hardened state, increasing the percentage of lightweight aggregate led
to an inverse behavior for compressive strength and specific mass, and a direct
behavior for water absorption, porosity and void ratio. With the aid of the scanning
electron microscope (SEM) it was observed that the thickness of the microcrack
between the quartz sand and the hydrated cement paste was smaller when
compared to the thickness of the microcrack between the lightweight aggregate and
the cement paste after compressive strength tests , which indicates that the
lightweight aggregate makes this region less resistant, which corroborates the 86%
drop in compressive strength at 28 days between the reference matrix and the matrix
containing 100% lightweight aggregate. By energy dispersive spectroscopy (EDS)
the chemical elements present on the surface of the samples were verified. Fourier
Transform Infrared Spectroscopy (FTIR) identified the characteristic functional groups
of materials and cementitious matrices at 7 and 28 days. With the aid of X-ray
diffraction (XRD) it was observed that the intensity of the characteristic peaks of
quartz reduced as there was an increase in the replacement of quartz sand by light
aggregate in the cementitious matrices. | eng |
dc.description.sponsorship | Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES | por |
dc.language | por | por |
dc.publisher | Universidade Federal de Santa Maria | por |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.subject | Indústria calçadista | por |
dc.subject | Agregado leve reciclado | por |
dc.subject | Argamassa | por |
dc.subject | Footwear industry | eng |
dc.subject | Recycled lightweight aggregate | eng |
dc.subject | Mortar | eng |
dc.title | Uso de agregados leves à base de resíduos de poliéster e laminado de PVC extrusados com poliestireno em matrizes cimentícias | por |
dc.title.alternative | Use of lightweight aggregate based on polyester and PVC laminate waste extrused with polystyrene in cementitious matrix | eng |
dc.type | Dissertação | por |
dc.description.resumo | A geração de resíduos provenientes dos diversos setores da economia brasileira
tem gerado estudos e pesquisas relacionados ao consumo e descarte dos mais
variados produtos. Neste contexto, inserem-se as indústrias do setor calçadista,
tradicionais no Estado do Rio Grande do Sul, as quais têm a necessidade de buscar
ações sustentáveis no reaproveitamento das sobras de matérias-primas da
produção de calçados. Portanto, este trabalho teve como objetivo avaliar o uso de
um agregado leve à base de resíduos de poliéster e laminado de PVC extrusados
com poliestireno reciclado em matrizes cimentícias. Foram preparadas argamassas
referência com traço, em massa, de 1:3 (cimento: areia seca) e relação
água/cimento (a/c) de 0,48. Outras quatro argamassas foram preparadas com teores
de substituição da areia quartzosa, em volume, pelo agregado leve, em 25%, 50%,
75% e 100%. Os resultados no estado fresco da argamassa mostram que a
trabalhabilidade reduziu com o aumento do percentual do agregado leve nas
argamassas. No estado endurecido, o aumento do percentual do agregado leve
conduziu a um comportamento inverso para a resistência à compressão e massa
específica, e um comportamento direto para a absorção de água, porosidade e
índice de vazios. Com auxílio do microscópio eletrônico de varredura (MEV)
observou-se que a espessura da microfissura entre a areia quartzosa e a pasta de
cimento hidratada foi menor quando comparada a espessura da microfissura entre o
agregado leve e pasta de cimento após ensaios de resistência à compressão, o que
indica que o agregado leve torna esta região menos resistente, o que corrobora com
a queda de 86% na resistência à compressão aos 28 dias entre a matriz referência e
a matriz contendo 100% de agregado leve. Pela espectroscopia por energia
dispersiva (EDS) foram verificados os elementos químicos presentes na superfície
das amostras. Por espectroscopia no Infravermelho com Transformada de Fourier
(FTIR) foram identificados os grupos funcionais característicos dos materiais e das
matrizes cimentícias aos 7 e 28 dias. Com o auxílio da difração de raios X (DRX)
observou-se que a intensidade dos picos característicos de quartzo reduziu na
medida que houve o aumento da substituição da areia quartzosa pelo agregado leve
nas matrizes cimentícias. | por |
dc.contributor.advisor1 | Vargas, Alexandre Silva de | |
dc.contributor.advisor1Lattes | http://lattes.cnpq.br/6501148372644975 | por |
dc.contributor.advisor-co1 | Aquim, Patrice Monteiro de | |
dc.contributor.referee1 | Masuero, Angela Borges | |
dc.contributor.referee2 | Lübeck, André | |
dc.creator.Lattes | http://lattes.cnpq.br/7042601812296138 | por |
dc.publisher.country | Brasil | por |
dc.publisher.department | Engenharia Civil | por |
dc.publisher.initials | UFSM | por |
dc.publisher.program | Programa de Pós-Graduação em Engenharia Civil | por |
dc.subject.cnpq | CNPQ::ENGENHARIAS::ENGENHARIA CIVIL | por |
dc.publisher.unidade | Centro de Tecnologia | por |