Mostrar registro simples

dc.contributor.advisorBarriquello, Carlos Henrique
dc.creatorSilva, Daniel Monteiro da
dc.date.accessioned2019-10-14T14:16:46Z
dc.date.available2019-10-14T14:16:46Z
dc.date.issued2019-08-26
dc.date.submitted2019
dc.identifier.urihttp://repositorio.ufsm.br/handle/1/18571
dc.description.abstractConsidering that the switched power supplies are widely implemented as power supplies for the control and command circuits for the powering of electric engines, we sought to implement a switched power supply using the flyback converter, in order to comply with the regulatory norm NR-10. To do so, it is necessary to design an extra-low tension, to design the electronic components that make up the switched power supply following the guide present in the literature and to design the flyback converter so that it reaches a switching frequency of 160 kHz, with a duty cycle of 0.4, a current variation of the magnetization inductor of 40%, and the converter output current of 1A. Then, a practical implementation of the flyback converter is performed. Given that, it is verified that the projected values were reflected in the circuit implementation, which imposes the constatation of the fact that the flyback converter proved to be of easy application, being able to comply with the requirements of NR-10 that discusses the measurement of collective protection demanding an extra-low tension.eng
dc.languageporpor
dc.rightsAcesso Abertopor
dc.subjectFonte chaveadapor
dc.subjectIndutor acopladopor
dc.subjectFlyback convertereng
dc.subjectSwitching powereng
dc.subjectCoupled inductoreng
dc.titleProjeto e implementação de um fonte de alimentação para switching painéis elétricos usando o conversor de flybackpor
dc.title.alternativeDesign and implementation of a switching power supply for electrical panels using the flyback convertereng
dc.typeTrabalho de Conclusão de Curso de Graduaçãopor
dc.degree.localSanta Maria, RS, Brasilpor
dc.degree.graduationGraduação em Engenharia Elétricapor
dc.description.resumoTendo em vista que as fontes chaveadas são largamente implementadas como fontes de alimentação para os circuitos de controle e comando para o acionamentos de motores elétricos, buscou-se a implementação de uma fonte de alimentação chaveada utilizando o conversor flyback, a fim de cumprir com a norma regulamentadora NR-10. Para tanto, é necessário projetar uma tensão de saída com baixa-extra tensão, Projetar os componentes eletrônicos que compõem a fonte de alimentação chaveada seguindo o roteiro presente na literatura e Projetar o conversor flyback para que ele atinja uma frequência de chaveamento 160kHz, com um duty cycle em 0,4, uma variação de corrente do indutor de magnetização em 40% e a corrente de sáida do conversor em 1A. Realiza-se, então, implementação pratica do conversor flyback. Diante disso, verifica-se que os valores projetados foram refletidos na implementação do circuito, o que impõe a constatação de fato que o conversor flyback se mostrou ser de fácil aplicação, podendo cumprir com as exigências da NR- 10 que discute sobre a medida de proteção coletiva exigindo uma tensão de extra-baixa tensão.por
dc.publisher.countryBrasilpor
dc.publisher.initialsUFSMpor
dc.subject.cnpqCNPQ::ENGENHARIAS::ENGENHARIA ELETRICApor
dc.publisher.unidadeCentro de Tecnologiapor


Arquivos deste item

Thumbnail

Este item aparece na(s) seguinte(s) coleção(s)

Mostrar registro simples