dc.contributor.advisor | Dalla Costa, Marco Antônio | |
dc.creator | Spannemberg Júnior, Rudimar | |
dc.date.accessioned | 2021-10-25T12:51:46Z | |
dc.date.available | 2021-10-25T12:51:46Z | |
dc.date.issued | 2019-07-18 | |
dc.date.submitted | 2019 | |
dc.identifier.uri | http://repositorio.ufsm.br/handle/1/22579 | |
dc.description | TCC (graduação) - Universidade Federal de Santa Maria, Centro de Tecnologia, Curso de Engenharia Elétrica, RS, 2019 | por |
dc.description.abstract | This paper presents the design, simulation and development of two topologies for
converters with the objective of developing a mathematical analysis describing the behavior
of the low frequency ripple transfer between the voltage variation in the bus for the current
variation in the LEDs. The topologies selected for study are the SEPIC (Single Ended Primary
Inductance Converter) converter and the ZETA converter, both operating in discontinuous
mode (DCM), since both have not been explored in this respect at the present time. The
analysis between the converters is designed to be used in integration between the PFC (Power
Factor Control) + PC (Power Control) focusing on the PC stage, with a single control loop
responsible for controlling the output current in order to reduce the required bus capacitance
and consequently compatibility with the recommendations of IEEE Std 1789-2015 to mitigate
the effects of flicker. Since the maximum allowable ripple to avoid any biological hazards any
biological hazards is 19.2%, the SEPIC allows bus voltage ripple values of up to 10,5%, while
the ZETA converter allows values of up to 9,6% for the selected LED (Light Emitting Diode)
tubular lamp. | eng |
dc.language | por | por |
dc.publisher | Universidade Federal de Santa Maria | por |
dc.rights | Acesso Aberto | por |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.subject | Conversores de potência DC-DC | por |
dc.subject | Conversor SEPIC e ZETA | por |
dc.subject | Lâmpadas led | por |
dc.title | Análise de transferência de ondulação de baixa frequência para os conversores SEPIC e ZETA para drivers de led | por |
dc.type | Trabalho de Conclusão de Curso de Graduação | por |
dc.degree.local | Santa Maria, RS, Brasil | por |
dc.degree.graduation | Curso de Engenharia Elétrica | por |
dc.description.resumo | No presente trabalho apresenta o projeto, simulação e desenvolvimento de duas
topologias para conversores, com o objetivo de desenvolver uma análise matemática
descrevendo o comportamento da transferência de ondulação de baixa frequência entre a
variação da tensão no barramento para a variação de corrente nos LEDs (Diodos Emissores de
Luz). As topologias selecionadas para estudo são o conversor SEPIC (do inglês, Single Ended
Primary Inductance Converter) e o conversor ZETA, operando ambos em modo de condução
descontínua (MCD), por ambos não terem sido explorados em relação a esse aspecto no
presente momento. A análise entre os conversores é concebida para ser usado em integração
entre o PFC (do inglês, Power Factor Control) + PC (do inglês, Power Control) focando no
estágio PC, com um único loop de controle responsável por controlar a corrente de saída
visando a redução da capacitância de barramento necessária e consequentemente a
compatibilidade com as recomendações da IEEE Std 1789-2015 para mitigar os efeitos de
flicker. Como o máximo permitido de ondulação para evitar qualquer risco biológico é de
19,2%, o SEPIC permite valores de ondulação de tensão de barramento de até 10,5%,
enquanto o conversor ZETA permite valores de até 9,6% para a lâmpada tubular LED
selecionado. | por |
dc.publisher.country | Brasil | por |
dc.publisher.initials | UFSM | por |
dc.subject.cnpq | CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA | por |
dc.publisher.unidade | Centro de Tecnologia | por |