Buscar
Itens para a visualização no momento 1-9 of 9
Contribuições ao estudo de conversores CC–CC com processamento parcial de energia aplicados a sistemas fotovoltaicos
(Universidade Federal de Santa Maria, 2017-12-18)
This work presents some conceptual and practical contributions about the use of series-regulated
DC/DC converters in multi-string photovoltaic systems, which have been presented in the literature
as capable of performing ...
Técnicas para otimização de conversores da família boost com alto ganho de tensão e alto rendimento aplicados à célula a combustível
(Universidade Federal de Santa Maria, 2019-02-28)
In this work, it is proposed methodologies for design optimization of high gain boost static converters
applied to fuel cells. In this aplication, two types of boost converters are evaluated.
The first one is based on ...
Inversor multiníveis quasi-Z-source com fonte CC única e compartilhamento de potência ativa entre os módulos
(Universidade Federal de Santa Maria, 2019-07-26)
Due to its ability to provide Maximum Power Point Tracking (MPPT) control and independent
regulation of the DC bus voltage, this makes the inverter quasi-Z-Source (qZS) an attractive
candidate for applications in ...
Conversores CC–CC bidirecionais para regulação série de tensão aplicados em sistemas fotovoltaicos
(Universidade Federal de Santa Maria, 2020-02-27)
This work provides some conceptual and practical contributions about the use of DC–DC power
converters connected as step-up/down series voltage regulators in string or multi-string architectures
of grid-tie photovoltaic ...
Microinversores baseados na topologia meia-ponte isolada alimentada em corrente
(Universidade Federal de Santa Maria, 2018-07-25)
The Microinverter is an inverter sized to meet individual solar panels, usually consisting of two stages, one DC-DC stage and another CC-AC stage. For the first stage of the DC link microinverter, the isolated current-fed ...
Metodologia de otimização de conversores estáticos com paralelismo de células boost aplicado à célula a combustível
(Universidade Federal de Santa Maria, 2019-02-28)
This thesis presents an optimized design methodology for non-isolated static converters with Nboost
cells in parallel, that process energy between a renewable energy source and a DC bus. The
method scans for the best ...
Contribuição à família de conversores CC-CC bidirecionais buck/boost
(Universidade Federal de Santa Maria, 2022-07-17)
With the search for clean renewable energies and the growing of the greenhouse
gases, there is an increase in the number of electric vehicles and own generation. As most
renewable energies are naturally in DC the best ...
Conversores compostos para o interlink entre os barramentos de baixa e extrabaixa tensão de nanorredes CC
(Universidade Federal de Santa Maria, 2022-07-27)
This thesis presents a study on isolated DC-DC converters for the interface between a
low voltage bus, EBT (48 V), and a low voltage bus, BT (380 V) for a 1.2 kW residential
DC-DC nanogrid. The proposed converter makes ...
Modelagem e controle de um conversor CC-CC sepic isolado de interruptor único com célula dobradora de tensão na saída para aplicação em microinversor fotovoltaico
(Universidade Federal de Santa Maria, 2023-10-30)
This dissertation presents a study of an isolated DC-DC converter model for interfacing
or coupling via a DC bus with a DC-AC converter in a microinverter. The proposed
structure initially uses the already known sepic ...