Buscar
Itens para a visualização no momento 11-20 of 31
Modelo de cálculo de perdas por comutação e método de seleção de tecnologias de transistores FET aplicados a conversores estáticos
(Universidade Federal de Santa Maria, 2020-02-07)
This dissertation presents an analytical model to assist in the calculation of switching losses and
a methodology for selecting MOSFETs that with breakdown voltages greater than 100 V. The
model was developed based on ...
Topologias baseadas no conversor Zeta aplicadas em módulos Pv integrados para carga de baterias
(Universidade Federal de Santa Maria, 2015-03-23)
The management system and Future Renewable Electric Energy Delivery (FREEDM) is an example of microgrid distributed generation (GD), which has a power management. In the current DC bus the FREEDM are connected to the ...
Análise da tensão do ponto neutro para o inversor ANPC de três portas: uma abordagem vetorial
(Universidade Federal de Santa Maria, 2020-10-08)
The ANPC topology with secondary bi-directional DC port (ANPC-3P) allows the connection
of energy storage systems (ESS) directly to the topology on a secondary DC port, assigning an
additional task to the inverter. In ...
Contribuição ao estudo do conversor multinível híbrido em cascata monofásico empregado na interface entre fonte fotovoltaica, banco de baterias e rede elétrica.
(Universidade Federal de Santa Maria, 2017-08-30)
This master thesis presents an energy management strategy in order to eliminate power fluctuations
from a photovoltaic source through a single-phase cascade hybrid multilevel grid-tie
converter associated with a battery ...
Emprego de um comutador eletrônico de taps para regulação de tensão em redes elétricas a partir do modelo de carga
(Universidade Federal de Santa Maria, 2018-08-31)
This doctoral thesis proposes a method for regulating the secondary voltage of distribution systems
based on the identification of ZIP models of the load (constant impedance, constant current and
constant power) at the ...
Análise estática normalizada e modelagem de pequenos sinais do conversor classe-e utilizando transformadores piezoelétricos
(Universidade Federal de Santa Maria, 2011-08-04)
Piezoelectric transformers (PTs) allow the design of promising power supply applications, increasing
efficiency, reducing size, facilitating the achievement of high transformation ratio, besides providing
high immunity ...
Metodologia de projeto do conversor DAB aplicado a transformadores de estado sólido
(Universidade Federal de Santa Maria, 2014-08-01)
This thesis presents a design methodology for the dual active bridge converter, that includes the influence of the nominal phase-shift angle in the behavior of the DAB converter for entire power and voltage ranges. The ...
Microinversores baseados na topologia meia-ponte isolada alimentada em corrente
(Universidade Federal de Santa Maria, 2018-07-25)
The Microinverter is an inverter sized to meet individual solar panels, usually consisting of two stages, one DC-DC stage and another CC-AC stage. For the first stage of the DC link microinverter, the isolated current-fed ...
Metodologia de otimização de conversores estáticos com paralelismo de células boost aplicado à célula a combustível
(Universidade Federal de Santa Maria, 2019-02-28)
This thesis presents an optimized design methodology for non-isolated static converters with Nboost
cells in parallel, that process energy between a renewable energy source and a DC bus. The
method scans for the best ...
Estudo e comparação de sistemas de acionamento para aplicações de alta potência e média tensão
(Universidade Federal de Santa Maria, 2010-08-24)
This Ph.D. Thesis proposes a comparison of modulation techniques, semiconductors devices technologies and topologies for multilevel inverters, in order to point out the multilevel drive system that presents the best ...